Subway Art for the Nursery

After the sonogram where I found out that I was having a girl, I found myself humming a little song by the Temptations quite often. Can guess which one it is? It became one of the main songs that I sang to my little bump as she grew, and I still sing it to her now. I knew I'd like a little piece of this to make it's way into her nursery, as it expresses how we all feel about her addition to our family and our lives. So this is what I came up with. Do you like it?! Want the details? Read on.

I started this project by rummaging through my small stash of wood, where I found a piece of old weathered barn wood that I thought would be perfect. I measured the width and length so that I could see roughly how large the letters needed to be and then turned to my Silhouette.

I browsed the wide selection of fonts available, tried a few of the lyrics in the different fonts until I found a few that I liked, and printed them in black and white on regular printer paper.

I laid the words out on the wood, picked the fonts that I liked best, went back to the Silhouette and played around with the sizes a bit until everything fit just the way I wanted it to.

I got some sturdy card stock and cut out each of the words using my Silhouette SD Cutter. I laid them out on the board just to make sure that I had everything exactly where I wanted it to be, and then took a picture that I could reference once I started my stenciling.

I pulled out my DecoArt paint in Daffodil Yellow and White, a few of the same colors that I used for the damask stencil on my nursery walls, in addition to Americana Paint in Grey Sky.

I used the cut out portion of the card stock as a stencil for this project. I laid it out one line at a time on the board, using my photo as a reference for spacing and centering.

I used this little sponge stencil brush, loaded it with paint, blotted off the excess, and lightly dabbed on the paint.

I wanted a light coverage, so I purposefully didn't work the paint into all of the cracks and crevices of the wood. I removed the stencil and gave the paint about 5 minutes to dry, which was all that it needed. I worked my way down the board, doing one line at a time and was finished in a flash.

There were a few places where the paint coverage was too thick for my liking, so I got a coarse sanding block and lightly sanded in small circles until I got the aged look that I was going for.

I then used my wire brush to scrape some lines into the paint and give it a further distressed appearance.

I sprayed the finished board with a light coat of polyurethane, added hanging wire to the back, and popped it up in the nursery.

I love love love it! It is impossible to rock Hannah in her room and not sing this song, and it brings a smile to my face every time I see it. It is one of those rare projects that turned out exactly the way I had pictured it in my head and I'm so happy with it!

I love the contrast of the coarse rugged wood and the crisp gray paint on the walls. It is a lovely addition to the nursery and I had the hardest time deciding where to hang it. But I love it!

Read More

Chalkboard Clothesline Christmas Card Display

Like many of you, I love receiving Christmas cards. But a few weeks into the holiday season I start to get more and more annoyed as they repeatedly slide down or go flying off of the refrigerator door every time that I open or close it. True, the problem is me and my desire to display them on the fridge, not the cards themselves. So I found a fabulous solution that was easy and inexpensive, a Chalkboard Clothesline Christmas Card Display. :)

This is a bit reminiscent of my craft room clothesline photo display from this summer.

I got this large frame back in the summer at the thrift store, and when I walked up to it I immediately thought to myself, Chalkboard! It's huge (42" by 33") and perfect for such a task. Once I got it home, I realized that it is an old Kirkland's sign. Pretty cool, huh? No wonder the frame was a bit ornate, and it was only $2.50!!! No way I could pass it up. It has been sitting in the garage ever since waiting for me to decide on a final destination for it, and I finally did.

I took the cardboard out of the frame and painted it with a coat of chalkboard paint. Then I hot glued some cotton twine in 2 rows on the back of the cardboard and popped it back into the frame.

I made this little pendant banner for that in-between time, when Christmas season has already started, but there aren't quite enough cards to fill up the frame. I wanted to keep it from looking too sparse in the beginning.

I also stamped some little Christmas symbols on the backs of a few of the flags as a shorter alternative to the Merry Christmas message.

Of course I hung each little flag (and card) with my favorite teeny tiny wooden clothespins, which you can get at any craft store.

And that's it! I love how the frame and the black background look against my walls, and that it makes a perfect and neutral matting for a variety of seasonal pictures and well wishes!

You may want to switch this out for a larger piece of art or something that is normally on your wall, as it has to be on the big side to adequately hold a bunch of cards. I personally decided that this frame needs a permanent presence in my kitchen, and it will have to evolve seasonally as it is the only thing that's big enough to work on this long blank wall beside my table. I may just remove the clotheslines and use the chalkboard.

Have a wonderful Christmas!!!

Read More

Family Blocks

Pin It

I have been trying to make these blocks for Jayce since well before Christmas, but the good thing about 19 month olds is that they have no concept of late Christmas gifts. And this is good for me.

Since both of our families live out of town, I try to show Jayce pictures and talk about our family members so that when we do get to see them, he has some idea of who they are. I saw this great article about blocks here, and decided that I would make Jayce some family blocks.

I started off with a piece of poplar wood from Lowes, 36” by 1 1/2” by 1 1/2” for $5. Luckily, one of our friends has a power saw and cut the wood into 1 1/2” blocks for me. They splintered a bit in the cutting process, but it was no problem since I was covering up the sides anyway, and I ended up with 18 blocks. (I saw some 2” blocks at Michaels the other day for $.99 a piece, so I saved $13 doing it this way!)

I Mod Podged scrapbook paper onto 4 sides of each block, trimmed the excess paper and then sanded the edges off. I think this little detail (the sanding) made all of the difference in the world. I love how the rounded edges look kind of worn and vintage.

We got an amazing printer for Christmas, (even though I was chastised that this was a really boring request), so I was able to print pictures of each of the family members, print corresponding names, and then Mod Podge these to the backs of the blocks. Here is our little family stack.

I gave each nuclear family a different pattern of scrapbook paper, because I wanted to give Jayce another way to see which family members “go together,” if that makes sense.

For the couples, I used a picture of the two people together, and just cut them apart. This was the easiest way of making sure that each person’s head was roughly the same size, and the backgrounds matched a bit too.

Jayce’s unmarried aunts had the same scrapbook paper as their parents. I don’t think that I’ll make new blocks once they get married, and since both just turned 20, I won’t need to worry about that too soon anyway.

However, I do plan on updating this middle block, once the new baby is born, able to be photographed, and a name is decided upon. For now, I just left the picture and name side blank.

As I was making the blocks I was so excited about them and slightly bummed that they would inevitably end up strewn around the house, so I decided to make myself a little family set to play decorate with. I used a more adult style scrapbook paper and printed the picture in black and white.

Once everything was glued on, I Mod Podged the whole thing with a matte finish to seal it.

As I was uploading my pictures onto the computer, Jayce ran over, saw the picture of our family blocks on the screen, pointed to Chris and said “Da!” I went upstairs, grabbed all of the blocks from where they had been drying and brought them down to show him. I obviously think that he is too young to read the names or understand all the family members right now, but he still could point out each of us, and was REALLY excited about stacking them. He also would periodically stand up and say, “Uhhh, uhhhh, goooooooooooo!” (ready, set, go) as he kicked over the stack. He is a boy after all.

I’m glad that I decided to seal the blocks, because one of them ended up in a cup of water shortly after he was done playing. I guess they do look a little bit like ice cubes. But the paper and photo were completely unaffected by the water.

Read More